Name: TAGRA 2024
Start: 2024-12-21T09:30:00+03:00
End: 2024-12-22T15:00:00+03:00
Location: Erzurum, Turkiye

TAGRA 2024

from Saturday, December 21, 2024 (9:30 AM) to Sunday, December 22, 2024 (3:00 PM)

Monday, December 16, 2024
Tuesday, December 17, 2024
Wednesday, December 18, 2024
Thursday, December 19, 2024
Friday, December 20, 2024
Saturday, December 21, 2024

9:30 AM

9:30 AM - 10:00 AM
Room: C/Ground-2 - Main Hall
10:00 AM Plenary Session
Plenary Session
10:00 AM - 1:30 PM
Room: C/Ground-2 - Main Hall
Contributions

10:00 AM Opening Speech: About TAGRA - Kaan Yeşilyurt (Syntagra)

10:05 AM Chair's Speech - Hayrunnisa Nadaroğlu (Ataturk University)

10:15 AM Design of a Decision Support System for Evaluating Students' Learning Outcomes and Program Outcomes Acquisition Levels in the Education and Training Process - Mahmut Yeşilyurt (İzmir Kavram Meslek Yüksekokulu)

10:30 AM Emerging Polymer-based 3-D Bioprinted Nanomaterials for Chronic Wound Healing - Saravanan Muthupandian (Prince Fahad bin Sultan Chair for Biomedical Research, Faculty of Applied Medical Sciences, University of Tabuk, Tabuk, Saudi Arabia)

10:50 AM Hydrogen Energy & Economy: Paving the Path to a Sustainable and Low-Carbon Future - Abdulaziz ATABANI (Yuan Ze University, Taiwan)

11:10 AM Nanobiocatalysis for Environmental Sustainability and Commercial Products Synthesis - Ashok Kumar Nadda (Jaypee University of Information Technology)

11:30 AM Fabrication and Characterization of Functionally Graded A356 Alloy and Its Composite - Prathap Singh S (Department of Mechanical Engineering, St. Joseph's Institute of Technology, CHennai, India.)

11:50 AM Silicon Carbide MOSFETs: From Devices to Advanced Packaging - Faiz Arith (Technical University of Malaysia Malacca)

12:10 PM Revolutionizing the Electronics Industry Using Nanotechnology - Zainab Yunusa (University of Hafr Al Batin)

12:30 PM CNT-ferrite Nanohybrid Materials for Electromagnetic Wave Applications - Intan Helina Hasan (Universiti Putra Malaysia)

12:50 PM Anti-inflammatory Potential of Some Commonly Used Plants in Unani Medicine - Ahmad Ali (University of Mumbai)
1:30 PM Break
Break
1:30 PM - 2:00 PM
Room: Venue TBA
2:00 PM
2:00 PM - 3:00 PM
Room: d/1-10 - Hall 4
Contributions

2:00 PM Evaluation of Traditional Erzurum Houses in The Context of Climate-Responsible Design - Şehriban Başaran (Graduate Student)

2:15 PM Investigation of Mechanical Properties of Fiber Reinforced Concrete After Exposure to Elevated Temperature - Yunus Urtekin

2:30 PM Assessment of the Effects of Infrastructure Projects in The Context of Cultural Heritage - Rabia Kaçdi (Graduate Student)
Session for Marine Sciences
Session for Marine Sciences
2:00 PM - 3:30 PM
Room: D/1-2 - Hall 2
Contributions

2:00 PM Preliminary Investigation of Microplastic Occurrence in Pinfish (Lagodon rhomboides) from the Grand Isle, Louisiana, USA - Yahya Terzi (Karadeniz Technical University)

2:15 PM Bacteriophage Therapy Approach in Fish Disease Treatment - DİLEK USTAOĞLU

2:30 PM Comprehensive Assessment of Pilot Boat Emissions in Turkey’s Eastern Black Sea Ports: A 2023 Case Study Using the Emission Factor Approach - Süleyman Köse (Karadeniz Technical University)

2:45 PM What is the Lifespan of a Vessel? - İshak Altınpınar

3:00 PM Importance of Understanding Marine Functional Connectivity in Marine Ecosystems - Rafet Çağrı ÖZTÜRK (Karadeniz Technical University)
2:00 PM - 3:30 PM
Room: D/1-1 - Hall 1
Contributions

2:00 PM Experimental Investigation of the Effects of Triple Mixtures of Waste Plastic Oil, Waste Transformer Oil and Diesel Fuel on Engine Performance and Exhaust Emissions - Uğurcan YAZICI (Atatürk University, Department of Mechanical Engineering)

2:15 PM Numerical Investigation of Heat Transfer of Nanofluid in a Square Channel - Mansur Mustafaoglu (Atatürk University)

2:30 PM Strategy for Enhancing Heat Transfer in Electronics: Keeping Devices Cool and Efficient - Hassen GHALY

2:45 PM Assessment of Different Solar Cell Technologies for Sustainability Indicators - Muhammet Kaan Yeşilyurt (Ataturk University)

3:00 PM Powder Characteristics and Mechanical Properties of AlCrCo Middle Entropy Alloy Synthesized via Mechanical Alloying - SERDAR ÖZKAYA (Karadeniz Technical University, Metallurgy and Materials Science Engineering)
2:00 PM - 3:05 PM
Room: D/1-8 - Hall 3
Contributions

2:05 PM Comparison of Power Consumption in Data Transmission at Different Distances in Edge Computing Systems of Wireless IoT Technology - Ahmet Ekmel KURT

2:20 PM RConvLSTM4AD: Residual Convolutional LSTM Model for Anomaly Detection on 3D Printer - Fadime KARADAŞ

2:35 PM Structural, Optical and Morphological Properties of α-Fe2O3:Ag Thin Films Grown on Different Substrates - Hilal Kübra SAĞLAM (ATATÜRK UNIVERSITY)

2:50 PM Synthesis of Carbon Dots from Plants for Biosensor Applications - Hatice YÜNCÜ (Ataturk University, Erzurum)
3:30 PM Break
Break
3:30 PM - 4:00 PM
Room: Venue TBA
4:00 PM
4:00 PM - 5:15 PM
Room: D/1-2 - Hall 2
Contributions

4:00 PM Assessment of Plant Development of Bean (Phaseolus Vulgaris L.) Under Deficit Irrigation Conditions - MUHAMMET GÖKHAN GÜRBULAK

4:15 PM Effect of Temperature and Agitation Speed on Adsorption Activity of TiO2/PLDOPA/Fe3O4 Nanocomposite for Lead Removal - Şule Binici (Ataturk University)

4:30 PM Determination of Laccase Enzyme Activity in Culture Medium of Caldibacillus Pasinlerensis Using Medlar and Hawkshort Seed - Fatma Melike YEŞİLYURT (Atatürk Üniversitesi)

4:45 PM Production and Optimisation of Peroxidase, Catalase and Polyphenol Oxidase Enzyme from Caldibacillus pasinlerensis Using Eribotrya Japonica Seeds - Melisa Virdil (Ataturk University, Erzurum)

5:00 PM Isolation of Lactic Acid Bacteria Showing the Best Probiotic Properties from Wine Samples Obtained from Different Regions of Azerbaijan - Narmin KARİMOVA (Ataturk University, Erzurum)
4:00 PM - 5:30 PM
Room: d/1-10 - Hall 4
Contributions

4:00 PM Evaluation of the Effects of Geometric Parameters on Thermal Performance in an Air Duct with an S-shaped Turbulator Using Numerical Methods - Orhan YILDIRIM (Atatürk Üniversitesi)

4:15 PM Experimental and Numerical Investigation of the Effect of Open Cell Aluminum Foams in Air Channel on Heat Transfer - Beytullah İsmet Toprak (Ataturk University, Faculty of Engineering)

4:30 PM Utilization of Geothermal Water Source Heat Pump in Space Heating in Cold Climate Regions - Sedat Akmeşe (Erzurum Technical University)

4:45 PM Impact of Rectangular Flow Components and Different Fluids on the Efficiency of Solar Collectors: An Experimental Analysis - Abdussamet Kabakuş (Artvin University)

5:00 PM Investigation of Heat Transfer and Dynamic Instabilities in an Empty Tube with Boiling Two-Phase Flow - Hasan Güven (Ataturk University, Faculty of Engineering)

5:15 PM Investigating the Weldability of Microalloyed Steel by Friction Stir Welding - Semih Mahmut Aktarer (Recep Tayyip Erdogan University)
Session for Mechanical Engineering
Session for Mechanical Engineering
4:00 PM - 5:15 PM
Room: D/1-8 - Hall 3
Contributions

4:00 PM Numerical Evaluation of Aerosol Deposition in Respiratory Tract Based on Chemical Properties and Size - Hacer ÜÇÜNCÜ (Ataturk University, Erzurum)

4:15 PM Experimental Investigation of the Effects of Adding Fe2O3 Nanoparticles to the Triple Mixtures of Pyrolytic Oil From Waste Tires, Waste Transformer Oil and Diesel Fuel on Engine Performance and Exhaust Emissions in a Diesel Engine - Veysel Ertekin (Ataturk University, Faculty of Engineering)

4:30 PM Investigation of Engine Performance and Exhaust Emissions of a Diesel Engine Using a Mixture of Waste Transformer Oil, Pyrolytic Oil Obtained from Waste Tires and Diesel Fuel - Mustafa Köksal İNCE (Atatürk University, Department of Mechanical Engineering)

4:45 PM Occupational Health and Safety in Medium-Scale Hydroelectric Power Plants - Selçuk SİNCAR (Ataturk University, Vocational School of Technical Sciences)

5:00 PM The Importance of Periodic Control in Safe Production - Selçuk Sincar
Session for Nano Frontiers
Session for Nano Frontiers
4:00 PM - 5:40 PM
Room: D/1-1 - Hall 1
Contributions

4:00 PM Investigation of Antioxidant and Antibacterial Activities of Nanoemulsions Obtained from Tarragon (Artemisia dracunculus) Essential Oil and Their Effects on Various Cancer Cells - Fatma Nur PINARBAŞI

4:15 PM A Photocatalytic Application of Modified Fe3O4 Nanoparticles - Feyzanur Hilal DASDEMIR (Ataturk University)

4:30 PM Bimetallic ZIF (Zeolitic Imidazolate Framework) Synthesis, Characterization and Removal of Some Azo Dyes from Wastewater by Photocatalytic Method - Nur Aybüke SÜVARİ

4:45 PM Development of Nano-Sensors for Detecting Carcinogenic Food Color Additives - Sümeyra OKCİ

5:00 PM Purification Characteristics of Montmorillonite Nano-clay for Pharmaceutical Uses - Abbas Razmi

5:15 PM In-Materio Physical Reservoir Devices based on Random Network of Nanomaterials for Future Autonomous Systems - Hirofumi Tanaka (Kyushu Institute of Technology, Research Center for Neuromorphic AI Hardware)
Sunday, December 22, 2024
11:00 AM
11:00 AM - 1:00 PM
Room: D/1-1 - Hall 1
Contributions

11:00 AM A Novel Binder in Titanıum Dioxide Thick Film Gas Sensor for Carbon Dioxide Detection - Siti amaniah Mohd chachuli (Universiti Teknikal Malaysia Melaka)

11:15 AM Design and Synthesis of MoO3 as HTL in Improving The Power Conversion Efficiency of Lead-Free All Tandem Perovskite Solar Cell - ZULFANIZAM ABDUL WAHAB

11:30 AM Numerical Insights into Defect-Induced Performance Limitations in Doped PANI/GO-Based Perovskite Solar Cells - Nabilah Ahmad Jalaludin (Universiti Teknikal Malaysia Melaka)

11:45 AM La-doped CUSCN Strategy for Bandgap Tuning in Enhancing Hole Transport Mechanism for Inorganic Perovskite Solar Cell - FARAH LIYANA RAHIM

12:00 PM Copper Iodide as Hole Transporting Layer for Perovskite Solar Cell - Omsri Vinasha Aliyaselvam (Universiti Teknikal Malaysia Melaka)

12:15 PM Investigation on Quality of Service (QoS) Parameters for 5G Network using OMNeT++ - Juwita Mohd Sultan

12:30 PM Quality of Service (QoS) Performance of Cellular-Vehicle-to-Everything (C-V2X) Communication in the 5G Network Using OMNeT++ - Fitria Afiqah

12:45 PM Investigation of Graphene Dopant Concentration on Eu₂O₃ Thick Film For Co₂ Gas Sensing - Kuberahventhan Sanmugavelan
11:00 AM - 1:40 PM
Room: D/1-2 - Hall 2
Contributions

11:00 AM Using Nano-clays to Improve the Antibacterial Properties of Sanitary Products - SHAHRIYAR KARIMDOUST (PAYAM NOOR UNIVERSITY)

11:20 AM Application of Clay Minerals in Environmental Cleaning - Parisa NAMI (PAYAM NOOR UNIVERSITY)

11:40 AM Geochemistry of Minerals and Their Vital Role in Medical Geology - Shahdad Mousavi

12:00 PM A Study on the Green Synthesis of Carbon Quantum Dots: Characterization and Its Application in the Detection of Heavy Metal Ion - Manoochehr Farjaminezhad (Department of Chemistry, Ardabil Branch, Islamic Azad University, Ardabil, Iran)

12:20 PM Cytotoxicity of Zirconium Oxide Nanoparticles on Diabetic Rabbit Tooth Gum Cells - Parvaneh Naserzadeh (Endocrine Research Center, Institute of Endocrinology and Metabolism, Iran University of Medical Sciences, Tehran, Iran)

12:35 PM A Study on Synthesis of Carbon Quantum Dots and Its Application in the Detection of Pb 2+ Metal Ions - Manoochehr Farjaminezhad (Department of Chemistry, Ardabil Branch, Islamic Azad University, Ardabil, Iran)

12:55 PM Removal of Ni²⁺ and Cr⁶⁺, Complexed with 1,5-diphenylcarbazide (DPC), Using a Graphene Oxide/MnO₂ Quantum Dot (GO/MnO₂-QDs) Nanocomposite - Maryam Babaei (Islamic Azad University, Ardabil, Iran)

1:15 PM Investigating the Oxidative Stress Mechanism of Carbon Dot Nanoparticles Exposed to Cells Isolated from Human Pituitary Cancer Tissue - Parvaneh Naserzadeh (Endocrine Research Center, Institute of Endocrinology and Metabolism, Iran University of Medical Sciences, Tehran, Iran)